164+ Flat Roof House Designs In Kenya

www.homebazaar.com

```html

Opening: Build Your Own DIY Birdhouse! Looking to add some charm to your garden and provide a haven for feathered friends? Building a birdhouse is a fun and rewarding DIY project that requires minimal tools and materials. This step-by-step guide will walk you through the process of creating a simple yet functional birdhouse. Get ready to attract some beautiful birds to your backyard!

Materials You'll Need:

• Untreated wood (pine, cedar, or redwood are good choices) approximately 1 board foot
• Wood glue
• Nails or screws
• Drill with drill bits
• Saw (hand saw or power saw)
• Measuring tape or ruler
• Pencil
• Sandpaper
• Optional: Paint or stain (make sure it's bird-safe!)

Step 1: Cutting the Wood Pieces First, you'll need to cut the wood into the following pieces. These dimensions are for a basic birdhouse suitable for smaller birds. You can adjust them as needed, but avoid making the house too large, as this can attract unwanted species.

• Front: 6 inches wide x 8 inches tall
• Back: 6 inches wide x 10 inches tall
• Sides (2 pieces): 6 inches wide x 7 inches tall
• Bottom: 6 inches wide x 6 inches deep
• Roof (2 pieces): 6 inches wide x 7 inches long

Using your measuring tape and pencil, carefully mark the dimensions on the wood. Then, use your saw to cut along the marked lines, ensuring clean and straight cuts.

Step 2: Creating the Entrance Hole On the front piece of wood, measure down about 2 inches from the top and mark the center. This will be the location of the entrance hole. Use a drill with a 1 1/2 inch drill bit (adjust size for the desired bird species) to create the entrance hole. Sand the edges of the hole to remove any splinters and make it smooth for the birds.

Step 3: Assembling the Birdhouse Now it's time to assemble the birdhouse. Start by attaching the sides to the bottom piece. Apply wood glue to the edges of the bottom piece and then carefully align the sides and secure them with nails or screws. Next, attach the front piece to the sides and bottom, again using glue and nails or screws. Finally, attach the back piece, ensuring it extends slightly above the sides (this overhang will help create a slanted roof).

Step 4: Adding the Roof Attach the roof pieces to the top of the birdhouse. Apply glue to the edges of the front, back, and sides, and then position the roof pieces, overlapping them slightly at the top to create a peak. Secure the roof pieces with nails or screws. Make sure there are no gaps that will let rain in.

Step 5: Finishing Touches Once the birdhouse is assembled, use sandpaper to smooth any rough edges and splinters. If you choose to paint or stain the birdhouse, be sure to use bird-safe, non-toxic products. Avoid painting the inside of the birdhouse. Allow the paint or stain to dry completely before placing the birdhouse outside. You can also drill a few small drainage holes in the bottom of the birdhouse to prevent water from accumulating.

Step 6: Mounting the Birdhouse Choose a suitable location for your birdhouse. Ideally, it should be in a sheltered spot, away from direct sunlight and strong winds. You can mount the birdhouse on a tree, post, or pole. Make sure it is securely attached to prevent it from falling.

Conclusion: Enjoy Your New Birdhouse! Congratulations! You've successfully built your own DIY birdhouse. Now, sit back and enjoy watching the birds move in and make it their home. Remember to clean the birdhouse out once a year (usually in the fall or winter) to keep it a healthy and safe environment for your feathered friends. Happy bird watching!

```

Main Differences Between Flat & Apartment Every Homebuyer Should Know

www.homebazaar.com

What Is A Flat?

www.redfin.com

Apartments To Buy In Sri Lanka

www.homelandsskyline.lk

Read More..

146+ Shed Plans 10 X 12

www.shednation.com

Introduction: Unleash Your Inner Builder: Creating a DIY Storage Shed Building a storage shed is a fantastic way to increase your property's value, declutter your living space, and gain a dedicated area for hobbies or projects. This guide will walk you through the process of constructing a 10x12 shed, providing step-by-step instructions to ensure a successful and rewarding DIY experience. Planning is key, so let's get started!

Step 1: Planning and Preparation Before you start swinging a hammer, careful planning is crucial.

• Obtain necessary permits: Check with your local building department for permit requirements and regulations.
• Create or purchase shed plans: There are many shed plans available online or from home improvement stores. Ensure the plans are detailed and easy to understand. A 10x12 shed is a common size and plans are readily available.
• Gather your tools: You'll need tools like a circular saw, drill, level, measuring tape, hammer, safety glasses, work gloves, and a post-hole digger (if building on concrete piers).
• Acquire materials: Purchase all the lumber, roofing materials, siding, nails, screws, and other hardware listed in your shed plans. It's better to have a little extra material than to run short.

Step 2: Building the Foundation The foundation is the backbone of your shed, providing stability and preventing moisture damage. There are several options:

• Gravel pad: A simple and cost-effective option for smaller sheds. Ensure proper drainage.
• Concrete slab: Provides a very solid and level base. Requires more work and concrete mixing.
• Concrete piers: A good compromise between cost and stability. Requires digging post holes and setting the piers in concrete.

For this example, we will assume concrete piers:

• Dig post holes: Follow your plan for the number and placement of piers. Dig the holes deep enough to extend below the frost line in your area.
• Pour concrete: Fill the holes with concrete and set the pier blocks in place. Ensure the piers are level.

Step 3: Constructing the Floor Frame Once the foundation is set, it's time to build the floor frame.

• Cut lumber: Cut the lumber according to your plans for the perimeter frame and interior joists.
• Assemble the frame: Assemble the perimeter frame using nails or screws. Ensure it's square.
• Install joists: Install the floor joists between the perimeter frame members, spacing them according to your plans. Use metal joist hangers for added support.
• Attach subfloor: Lay down the subfloor (plywood or OSB) and attach it to the frame using nails or screws.

Step 4: Building the Walls Next, you'll frame the walls.

• Cut wall studs: Cut the wall studs, top plates, and bottom plates according to your plans.
• Assemble wall frames: Assemble each wall frame on the ground. Include window and door openings. Ensure the frames are square.
• Raise the walls: With help, raise the wall frames and brace them temporarily.
• Attach the walls: Attach the wall frames to the floor frame and to each other using nails or screws. Ensure the walls are plumb (perfectly vertical).

Step 5: Installing the Roof The roof protects your shed from the elements.

• Build roof trusses or rafters: You can either build your own roof trusses or rafters according to your plans, or purchase pre-made trusses.
• Install the trusses or rafters: Attach the trusses or rafters to the top plates of the walls, spacing them according to your plans.
• Sheath the roof: Cover the roof frame with plywood or OSB sheathing.
• Install roofing material: Install the roofing material (shingles, metal, etc.) according to the manufacturer's instructions.

Step 6: Adding Siding and Trim Siding protects the walls and gives your shed its finished look.

• Install siding: Install the siding material (wood, vinyl, metal, etc.) according to the manufacturer's instructions. Start at the bottom and work your way up, overlapping each course.
• Install trim: Add trim around windows, doors, and corners to cover gaps and give the shed a finished appearance.

Step 7: Installing Doors and Windows Now it's time to add the doors and windows.

• Install door frame: Install the door frame in the prepared opening.
• Hang the door: Hang the door and install the hardware (hinges, handle, lock).
• Install window frames: Install the window frames in the prepared openings.
• Install windows: Install the windows and seal them properly.

Step 8: Interior Finishing (Optional) Depending on your needs, you can finish the interior of your shed.

• Insulation: Add insulation between the wall studs and roof rafters to regulate temperature.
• Wall covering: Cover the walls with plywood, drywall, or other material.
• Shelving: Install shelves for storage.

Conclusion: Enjoy Your New Storage Space Congratulations! You've successfully built your own 10x12 storage shed. Now you can organize your tools, equipment, and other belongings, freeing up space in your home and garage. Remember to maintain your shed over time to ensure its longevity. Building a shed is a challenging but rewarding project that adds value to your property and provides a valuable storage solution.

Cedarshed Studio 12x6 Shed [st126]

www.shednation.com

Cottage Style Shed

www.mysheds.com

Forest Garden 4 X 3 Wooden Storage Shed

www.wayfair.co.uk

Read More..